| PROXIMITY TECHNOLOGY |
Revolutionary patent pending technology creates a secure "safety zone" around
you making sure your tagged laptop is not forgotten or stolen. Your MONITOR
alarms to let you know if your laptop goes outside of your preset Safety Zone.
|
 |
| |
AUTOMATIC: PEACE OF MIND |
TagAlert™ constantly tracks your tagged laptop and will alert
you automatically if you leave it behind. There is no need to press buttons to
find lost items.
|
| |
ADJUSTABLE DISTANCE |
TagAlert™ provides you the flexibility to determine the Safety
Zone for your laptop by offering a choice of either a short (up to 30 ft) or
long (up to 100 ft ) range setting.
|
| |
SNOOZE FEATURE |
With the press of a button on the MONITOR, you can
temporarily disable the alarm for 10 minutes, allowing you to intentionally
walk away from your laptop.
|
| |
LONG BATTERY LIFE |
The MONITOR (2 x CR2032) and TAG (1 x CR2016)run upto
6 months on a single set of batteries. Batteries are included.
|
| |
MANY TAGS WORK TOGETHER |
TagAlert™ technology makes sure your MONITOR only tracks
your TAG and does not accidentally track any other TAG. TagAlert™
will not interfere with your cell or cordless phones.
|
| |
LOUD AUDIO ALERT |
|
| » Go Top |
| |
| OPERATING INSTRUCTIONS |
| STEP 1.
|
Properly hold TAG and battery protective strip to ensure successful
removal of strip from battery compartment. Holding TAG on top of battery
door may cause strip to tear.
|
 |
|
| STEP 2.
|
It is important the TAG be placed at the edge of the laptop to reduce
false alarms.
|
 |
|
| STEP 3.
|
Slide switch on MONITOR to "SHORT" or "LONG" while TAG is a few feet
away. One beep will sound if TAG was located. Every few seconds LED will
blink to indicate TAG is tracking.
|
 |
|
| STEP 4.
|
If the TAG exceeds the selected range ("SHORT" or "LONG") your MONITOR
will automatically alarm.
|
 |
|
| STEP 5.
|
If you wish to intentionally walk away from your item, press SNOOZE to
temporarily disable the alarm for 10 minutes.
|
 |
| |
 |
 |
| » Go Top |
| |
| Turn MONITOR to "SHORT" E
setting while TAG F
is about 1 foot away. After 10 seconds a single beep will sound and LED will
start blinking. Holding MONITOR, begin walking away from TAG
F. Note distance alarm
A goes off for your "SHORT" setting. Turn MONITOR
to "LONG" E setting
and continue walking away. Note distance alarm goes off for your "LONG"
setting. Note: There is a 3 second delay for the alarm, so don't walk away too
quickly while testing.
|
| » Go Top |
| |
 |
STEP 1
To open, use a small philips
head screwdriver to gently turn counterclockwise and remove the screw.
|
 |
STEP 2
Remove battery door and battery by sliding as shown.
|
 |
STEP 3
To place battery in position, identify the positive side of the battery marked
"+", this is also the smooth side of the battery. Keep the positive side face
up and slide battery under the positive battery contact.
|
 |
STEP 4
Once battery is in place, put battery cover back as shown.
|
 |
STEP 5
With a small philips head
screwdriver,gently turn clockwise untill screw stops.
NOTE: Do not turn with too much force as you may damage the screw head.
|
|
| » Go Top |
| |
 |
STEP 1
Unscrew the two screws and remove door by sliding as shown.
|
 |
STEP 2
Insert 2 x CR2032 batteries as shown and screw the door back on.
IMPORTANT:
Make sure screws are turned all the way.
|
| |
Check batteries regularly by
observing the LED is still blinking. Replace batteries when needed to ensure
proper operation. DO NOT use TagAlert™ system when batteries are low. DO
NOT mix old and new batteries, it is best to replace both TAG and MONITOR
batteries at the same time. DO NOT mix alkaline, standard (carbon zinc). DO NOT
use rechargeable (nickel-cadmium) batteries.
|
|
| » Go Top |
| |
| MONITOR |
|
If you prefer, change between Clip C
and Key Chain D holding
options by unscrewing MONITOR B
battery door.
|
| Direct Adhesive: Peel off TAG adhesive seal
G and stick to edge of laptop
H.
|
| |
ADHESIVE IS VERY STRONG. MAKE
SURE OF LOCATION BEFORE STICKING ON TAG.
|
| |
 |
 |
| » Go Top |
| |
| HOW TO WEAR YOUR TagAlert™ TO REDUCE FALSE ALARMS
|
Your TagAlert™ uses advanced Radio Frequency 'RF' technology
that offers exceptional advantages of not requiring the MONITOR and
TAG to have direct line of site to work.
However, operation may be affected by the manner in which the MONITOR
is worn on the body or TAG is attached to an item. Under certain
conditions, the ALERT range may become shorter resulting in false
alarms.
|
To Reduce False Alarms:
-
Put setting on LONG
-
Adjust location of MONITOR or TAG to be closer to
each other. The body can greatly shorten the alert range so try to position the MONITOR
and TAG on the same side of the body.See examples in diagrams
below.
-
If false alarms persist, press SNOOZE to silence alarm for 10 minutes,
or turn MONITOR
off for about 15 seconds and then turn back on.
|
|
|
| GENERAL TIPS |
-
The MONITOR
performs best when worn away from your body, such as attached to a purse strap
or clipped to a belt loop. Try to avoid attaching many keys to it and putting
it in then pocket of your pants
-
To minimize false alarms, keep TAG as close as possible to the MONITOR
at all times.
-
Metal objects, such as coins, may cause false alarms if they touch or are
located very close to the MONITOR or TAG
-
Test the MONITOR and TAG in the manner they will be
worn (example : MONITOR clipped to purse strap or pants belt and TAG
adhered to laptop while laptop is in bag or placed on desk.)
|
| » Go Top |
| |
|
Do not return this product to the place of purchase. If any parts are missing,
or if you are having difficulty using this product visit our web site at www.tagitsafe.com.
Or call Consumer Support at 800-515-2928.
|
| » Go Top |
| |
| a) MONITOR does not make a sound even when TAG is out
of range and LED never blinks. |
| b) MONITOR alarm always beeps when MONITOR is on |
| c) MONITOR beeps once every 10 minutes |
| d) MONITOR alarms when TAG is in close range (false
alarm) |
| e) Not Sure TagAlert™ system is working |
| f) MONITOR never makes a sound and LED is blinking |
| |
| a) 1.MONITOR needs to be reset. |
| 2.MONITOR batteries are dead. |
| b) 1.TAG needs to be reset |
| 2.TAG battery is dead. |
| c) MONITOR batteries are getting low |
| d) Method MONITOR and TAG are worn or used is not
optimal |
| e) Need verification TagAlert™ system is operating properly |
| f) Speaker may be damaged |
| |
| a) 1.Reset MONITOR by removing and installing batteries
again. |
| 2.Replace MONITOR batteries |
| b) 1.Reset TAG by removing battery, wait 10 minutes and
install again. |
| 2.Replace TAG battery |
| c) Replace MONITOR and TAG batteries |
| d) Review suggestions on other side "How to Wear Your
TagAlert™" to Reduce False Alarms » Go |
| e) Follow section "Testing System" to test unit » Go |
| f) Contact our Customer Support for help |
| » Go Top |
| |
Remote Play, Inc. warrants to the original purchaser that this product
(TagAlert™), is free from material and workmanship defects when used under
normal conditions for a period of one (1) year from the date of purchase.
Should the product contain defects in material or workmanship Remote Play,
Inc., will repair or replace the product, at our option, free of charge.
Purchaser will be responsible for all costs associated with packaging and
shipping the product to Remote Play, Inc. Consumer Support Department at the
address noted on front page and all other freight or insurance costs associated
with the return. Remote Play, Inc. will bear the cost of shipping the repaired
or replaced product to the purchaser. Product should be returned in its
original package accompanied by a proof of purchase, either a sales receipt or
other proof that the product is within the warranty period. This warranty is
void if the owner repairs or modifies the product or the product has been
damaged as a result of misuse. This warranty excludes any liability other than
that expressly stated previously, including but not limited to, any incidental
or inconsequential damages.
|
|
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS THAT MAY VARY FROM STATE TO STATE.
|
| » Go Top |
| |
-
The TagAlert™ system is not intended to replace responsible and proper
supervision.
-
Do not use TagAlert™ on board an airplane. You can turn off the TAG by
removing the battery.
-
TagAlert™ contains small parts not suitable for children.
-
It is essential to check reception regularly. Please see the "Testing System"
section for complete instructions.
-
Check batteries regularly by observing the LED blinking. An audio tone will
occur when batteries are low.
-
RF distance measurements are not accurate and can vary from one locale to the
next.
-
This product should be serviced only by qualified service personnel at Remote
Play, Inc. when:
-
The MONITOR or TAG have fallen
-
Liquid has spilled into the MONITOR or TAG or either unit has fallen into
water.
-
The MONITOR or TAG does not appear to operate normally or exhibit a marked
change in performance.
-
DO NOT attempt to service this product beyond that described in the
Troubleshooting section. All other servicing should be referred to qualified
personnel at Remote Play.
|
| » Go Top |
| |
DO NOT DISASSEMBLE MONITOR OR TAG. THIS
WILL VOID THE WARRANTY. NO SERVICEABLE PARTS INSIDE. REFER SERVICING TO REMOTE
PLAY CONSUMER RELATIONS 800-515-2928.
|
|
| » Go Top |
| |